Technical specification

HOISTING TACKLE
Admissible hook load, kN (ton force)	981 (100)
Drive of mechanisms:	YAMZ-8424 (425 hp) chassis drive power of 330 kWatts
Drilling winch:
- tractive effort of drilling drum, kN (ton force)	140 (14)
- bailing block lift speed, m/sec	0,15...1,5
Bailing winch:
- tractive effort of bailing drum, kN (ton force)	70 (7)
- bailing line lift speed, maximum, m/sec	10
- carrying capacity of bailing drum, m	2 000 (?15 mm) ... 2 500 (?13 mm)
Mast:	Telescopic, double-section, inclined with opened front edge
- the distance between the crownblock axle and the ground, mm	30 000
- length of lift stand, mm	16 000 - 18 000
Racking board capacity:
- of drilling pipes (of diameters 114 mm and 127 mm), running length, m	2 500
- tubing and drilling pipes (of diameters 73 mm and 89 mm), running length, m	5 000
Tackle system:	Equipped with drilling line bypass
- wireline string-up	4 x 5
- drilling line diameter, mm	25
Auxiliary hydraulically driven winch:
- admissible load, kN (ton force)	30 (3)
Working/setting hydraulic system:
- pump type and design	Axial-piston pump 3102.112 - 2 pcs./ NSH-50 Design
- nominal pressure, MPa (atm)	20 (200) / 16 (160)
- nominal output, liter per minute	370/50
Hydraulic breaker	2 pcs
- rod stroke, mm	950
- developed force, kN (ton force)	55 (5,5)
Manifold (drill hose riser):
- flow area, mm	76
-working pressure, MPa (atm)	20 (200)
Emergency electric drive:
- electric motor capacity, kWatts	30
- hook block hoisting speed at maximum admissible load, m/min	0,5
- maximum speed of hook-block lift, m/min	1,5
Light, V	220, (emergency 24) explosion-protected light
Overall dimensions of hoisting tackle (in traveling position), mm	20 000 x 3 250 x 4 500
Mass in traveling position, kg	48 000
COMPONENT EQUIPMENT
Drilling rotor RUP560:
- drive type	Mechanical	Hydraulic
- flow area, mm	560	560
- admissible load of table and slips, kN (ton force)	981 (100)	981 (100)
- drive capacity, kWatts (hp)	180 (240)	120 (160)
- maximum torque, kN*m (kgf*m)	20 (2 000)	16 (1 600)
- maximum rotational frequency, s-1 (rev/min)	2,5 (150)	1,66 (100)
VB100 drilling swivel:
- safe load, kN (ton force)	981 (100)
- bore diameter, mm	75
- maximum rotational frequency, s-1 (rev/min)	6 (360)
- well-logging cable diameter, mm	8...11
Block of wellhead platform and catwalk:
- distance between rotary frames, mm	4 500
- admissible load, kN (tone force)	981 (100)

ARB-100 rigs are produced in various design (completions), it depends on applied chassis type and prevailing designation

Chassis

Designation

Rig components, rig identification

Hoisting tackle without bailing drum

Hoisting tackle with bailing drum

Mobile block of wellhead platform and catwalk

Wellhead working area

Setback

Mobile catwalk

R-410 rotary table

RUP-560 rotary table

VB100 drilling swivel

80x80 kelly, 8 m length

112x122 kelly

Bail set

Drill hose 76x20

BAZ- 69096

Well completion, Well-workover operation

ARB-100.001

ARB-100.011

Well drilling, Well recovery

ARB-100.002

ARB-100.012

KZKT- 8014

Well completion, Well-workover operation

ARB-100.101

ARB-100.111

Well drilling, Well recovery

ARB-100.102

ARB-100.112

Order includes only components for ARB-100.002, ARB-100.012, ARB-100.102, ARB-100.112 rigs :

• drive mode of R-560 rotary table (mechanical or hydraulic);
• dimension-types of R-560 rotary table wedge - 60, 73, 89, 102, 114, 127, 140, 146, 168, 178, 194, 219, 245, 273, 299, 324, 340 (additional payment);
• length of 112x112 kelly - 10 m; 11 m; 12,5 m.

Equipment set due to TU 3661-088-05749197-2000

Optional equipment on customer’s request